Sunlight and wind sensor

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here. -Set Opt-out Cookie

Thanks to the light and wind sensor you can just lean back and watch how your markilux reacts: If the weather changes, the automatic sensor triggers the right reaction. Your markilux will extend automatically as soon as the sun appears or retract into its cassette - of its own accord - if the wind picks up significantly.

Light and wind sensors are particularly practical, if you wish to protect indoor furnishings from fading or to prevent the interior of the house heating up excessively. This comfort is particularly recommended for living and sleeping spaces - turn your markilux into your "weather butler"!

Light and wind sensor

Light and wind sensor Soliris Uno

Depending on the prevailing conditions with regard to the wind and sun one awning will be extended or retracted. The wind speed and lux value required to do this is set directly at the sensor. There is a sliding switch which can quite simply deactivate the sun sensor. The awning can then be controlled manually.

Light and wind sensor Soliris IB

Depending on the prevailing conditions with regard to the wind and sun several awnings will be extended or retracted. The wind speed and lux value required to do this is set directly at the sensor. There is a sliding switch which can quite simply deactivate the sun sensor. The Soliris IB is designed to work with a group control unit (each drive unit requires an additional motor control mechanism), whereby each individual control mechanism is connected to a bus system (IB Bus).

Radio Controls 433 MHz

Radio controlled light and wind sensor Soliris Sensor for RTS motors

Depending on the prevailing wind and sun conditions the awnings are extended or retracted. The values for the wind and lux sensors are set at the central control unit. The Soliris Sensor RTS transmits the signals by radio wave. This does away with all the wiring to the central control unit and the motor drive. The sun sensor can be manually activated or deactivated by means of a remote control.

Radio controlled light and wind sensor Soliris Sentor for RTS motors, with connection for rain sensor

Depending on the prevailing wind and sun conditions the awnings are extended or retracted. The values for the wind and lux sensors are set at the central control unit. In combination with a suitable rain sensor (order no. 8272065) the awning will retract if it starts to rain. The Soliris Sensor RTS transmits the signals by radio wave. This does away with all the wiring to the central control unit and the motor drive. The sun sensor can be manually activated or deactivated by means of a remote control.

Radio controlled wind sensor Eolis Sensor RTS

Keeps as constant eye on the wind speed: as soon as the individual preset value is exceeded, the sensor retracts the awning. Radio controlled operation makes wiring between the operating point and the motor drive unnecessary. Only a 230 V power supply cable is required.

io Radio controls

Radio controlled wind sensor Eolis WireFree io

The battery-powered radio controlled wind sensor Eolis WireFree io can be mounted directly at the façade without any annoying cables. The wind threshold value can be set individually at the sensor or via the radio façade control Easy Sun io.